background image

QA-MRK-FM-08-02 v1 

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. 
and any use of such marks by Kondor Ltd. is under license. Other trademarks and trade names are 
those of their respective owners. 

    

All trademarks are acknowledged as the property of their respective owners. Unless otherwise 
stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the 
products herein. 
 
Products showing the ‘Crossed Through’ wheelie bin symbol must be recycled separately from 
household waste at the end of their useful life. Please DO NOT dispose of this appliance in normal 
household waste. Your local appliance retailer may operate a ‘take-back’ scheme when you are 
ready to purchase a replacement product, alternatively contact your local government authority for 
further help and advice on where to take your appliance for recycling. 
 
Please recycle this packaging responsibly. 
 

  

 

 

    

  

  

    

 
JB. 6774-x/REG05/

KSSLA70

/Made in China. © KitSound is a trademark of Kondor Limited, 2019. 

Christchurch, Dorset, BH23 4FL, UK 

Summary of Contents for SLAM 70













Reviews: