background image

8

9

Troubleshooting 

• 

If you cannot connect the headphones to your device, please try the following:

 

– Ensure that the headphones are charged, switched on, paired with and connected to your device

 

–  Check the headphones are within 10 metres (30 feet) of your device and that there are no 

obstructions (such as walls or other electronic devices) between the headphones and the device 

 

–  Only one device may be paired to these headphones at a time, so please ensure there are no 

conflicting wireless devices trying to connect to the headphones

• 

If the headphones will not switch off, they can be reset back to normal by putting them on charge

• 

 If you receive an intermittent signal, please ensure the headphones are fully charged before 
continuing use

• 

 If you do not use the headphones for longer than 3 minutes whilst not connected to a device, they will 
automatically power off to conserve power

We hope you’ve now got all the information you need to get started, but if you’re having problems with 
anything, please feel free to contact us at: 

[email protected]

Specifications

Works with Bluetooth

®

 V4.1

Bluetooth range

Up to 10 m

Frequency response

20 – 20 KHz

Talk time

Up to 5 hours

Play time

Up to 5 hours

Standby time

Up to 100 hours

Battery type

3.7 V, 70 mAh, LiPo rechargeable

Charge time

Up to 2 hours

Summary of Contents for RACE SPORTS







Reviews: