Kitsound KS DIGGIT, User Manual

Page: 8 / 10

14 15
Specifications
Works with Bluetooth
®
V4.2
Bluetooth connectivity distance up to 10 m
Bluetooth connectivity distance between
two Diggits in TWS mode up to 5 m
S/N 81 dB +/– 2dB
Frequency band 2402 – 2480 MHz
Transmission power 4 dBm (conducted)
Frequency response 50 Hz – 20 kHz
Drivers 2 x 40 mm
Output RMS 2 x 5 W
Battery rechargeable Li-ion, 1200 mAh, 5 V
Play time up to 8 hours
Charging time up to 3 hours
IP ratings IP55
Working temperature –10℃ ~ +40℃
Dimensions (mm) H160 x W62 / H240 – including tube and stake
Weight 0.35 kg
Care for your Diggit
Please DON’T:
•
Submerge the Diggit speaker in water or leave out overnight because of rain or condensation,
the speaker is only water resistant from spray water for over 3 minutes
•
Drop the Diggit as this will invalidate your warranty
•
Open up the Diggit as this will invalidate your warranty. There are no user serviceable parts inside
•
Expose the Diggit to extreme temperatures or rapid changes of hot to cold or vice versa
•
Take care when staking the tube and spike into the ground; do not use any third party object or
the Diggit to force it into the ground
•
Place the Diggit in a suitable location where it minimises the risk of trips to yourself and others
•
The LED ring light on the Diggit is bright, but do not use this as a torch
Please DO:
•
Clean the Diggit with a soft dry or slightly damp cloth and no detergents
•
Clean the stake and tube with a damp soft sponge after use