background image

12

13

Specifications

Bluetooth

V4.0

Bluetooth range

up to 20 metres

Battery

7.4 V 2600 mAh

Output RMS

20 W

Frequency response

50 Hz – 20 kHz

S/N

85 dB

Drivers

2 x 40 mm

Aux-in

3.5 mm

Aux-out

3.5 mm

Play time

up to 8 hours (at 70% volume)

Charging time

up to 5 hours

Troubleshooting

We hope you’ve now got all the information you need to get started, but if you’re having problems with anything, 
please feel free to contact us on: 

[email protected]

The use and operation of this speaker is beyond our control. Warranty of the Hive Evolution is limited to defects 
caused by faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage 
caused by the user under any circumstances.
This does not affect your statutory rights.

Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product 
has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause 
personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties

Summary of Contents for hive evolution









Reviews: