4
5
Instructions for use
Charging the battery
1. Connect the Micro USB charging cable to the Micro
USB charging port (5) and plug into a power source
2. The LED indicator (6) will be red whilst charging,
and finish after around 2–3 hours. Once fully charged,
the LED indicator (6) will turn off
3. If the LED indicator (6) flashes red quickly every
30 seconds and a warning beep is heard, the battery is low
Note:
The first charge may take up to 4 hours to complete.
Pairing a Bluetooth device
1. Hold the MFB (2) down for 3 seconds. You will see the
LED indicator (6) flash blue and red quickly and then
enter pairing mode
2. Turn on your iOS, Android, or Windows device’s
Bluetooth ON and search for new devices
3. Select ‘KS Exert’ from the list of found devices. If asked for
a passcode, enter ‘0000’ and the headphones will then be
connected to your device
4. After pairing successfully, the LED indicator (6) will be solid
blue; you can then answer the phone or listen to your music
6. The next time you switch the headphones on, they will
automatically search for and attempt to connect to the
last paired device
[continued...]