10
11
Instructions for use
Getting started
1. Plug the AC cord plug into a convenient AC wall outlet and switch it on
2. The LED indicator (1) will be Red
3. The Evoke is now in ‘STANDBY’ mode
4. Press the button (7) to turn the Evoke on
5. Press and hold the button (7) on the Evoke for 2 seconds (short press on remote) to put the Evoke
in standby mode
6. Disconnect from the mains to eliminate standby
Bluetooth setup
Pairing a Bluetooth device for the first time
With the Evoke in standby mode:
1. Press the button (7)
2. The LED indicator (1) will turn from red to a flashing blue
3. Using the controls on your Bluetooth device, select the ‘Evoke’ in your Bluetooth settings to pair
Note: If your device requests a password, enter ‘0000’.
Note: Refer to your device’s user manual for instructions on pairing and connecting Bluetooth devices.
4. When connected, the Evoke’s LED indicator (1) will turn solid blue
Pairing using NFC
If your device has built in NFC, follow the instructions in the previous section up to step 3, then:
3. Activate NFC and Bluetooth on your device (refer to your device’s user manual if unsure of how to do this)
4. Tap your device on the NFC tab area (2) of the speaker
5. When connected, the Evoke’s LED indicator (1) will turn solid blue
Re-pairing or pairing new devices
1. Make sure the Bluetooth is turned off on any previously paired devices
2. Make sure the Evoke is in Bluetooth mode and the LED indicator (1) is flashing blue
3. Follow step 3 onwards in the previous pairing instructions
