Alarm mode setting:
Tap “ /T- “ or “ /T+” and enter into the alarm setting mode
（
TONE/IPOD/RADIO
）．
Select the mode and tap
”VOL-/AL MODE” to return to clock mode.
Alarm setting
：
Under STAND BY mode, press and hold “VOL-/AL MODE” when there will be time displaying and LCD shinning. Tap
“ /T- “ or “ /T+” to set “hour”
，
and“VOL-/AL MODE”to set “mimute” and then tap“VOL-/AL MODE” again to
confirm the setting and return to clock mode.
Clock setting:
Under standby mode, press “ /MEM/SET” and hold it into clock setting, then there will be clock shining on LCD. Tap
“ /T- “or “ /T+” to set “hour” and tap “ /MEM/SET” to set “minute”, then press“ /MEM/SET”again to
confirm the setting and resume to clock mode.
Memory selection:
Press “ /MEM/SET”to alternate the memory channel.
Power supply
DC 5V
AC 100 - 240 V adapter
T
uning system FM
87.5 - 108 MHz
T
uning sensitivity
FM < 20 dB
Frequency response
20 Hz - 20 kHz (aux in)
S/N Ratio
> 60 dB
Audio output
Stereo speaker (1.2 W x 2)
Audio input
iPod dock
3.5 mm auxiliary line in
Specifcations and instructions manual are subject to change without notice.
Manual channel memory
：
When get acess to the channels by manual, press “ /MEM/SET”and hold for a while. Press “ /T- “or “ /T+” to
choose the saving location. 20 channles can be memorized and saved.
3. AUX operation
Select AUX under power on and input the external music source to AUX, turn on volume and the music is ready.
Volume:
VOL- and VOL+ can be adjusted within 00-20.
SNOOZE:
When Alarm rings, press “SNOOZE” to set up snooze function. Then alarm pauses and will ring again in 9 minutes, if press
“POWER” at this time, the alarm will stop and terminate.
SLEEP:
Press “SNOOZE/SLEEP/LIGHT” under any mode and then start to set the snooze and select
120M-90M-60M-30M-15M-OFF.
LIGHT:
There are three brightness modes of LCD when the unit is in stand-by.
Specifications:
