12
13
re-pairing or pairing new devices
1. Make sure the Bluetooth is turned off on any previously paired devices,
or press and hold the pair button (5) on the remote for 4 seconds
2. Follow ‘Pairing a Bluetooth device’ instructions from step 1
Playing audio via Bluetooth
1. Follow the instructions in the ‘Pairing a Bluetooth device’ section
2. Use the controls on your device to select content
3. Audio played through the connected Bluetooth device will now be
heard through the speaker
4. To play or pause the selected track, use the controls on your device
or press the play/pause button (7) on the remote
5. To skip track, use the controls on your device or press the previous/
next track buttons (C/6)
6. The volume can be adjusted on both your device and the Chorus.
To adjust the volume on the Chorus, press the Volume –/+ buttons (D/2)
note for using Bluetooth
Your device will have an internal amplifier and if it is playing digital files
like MP3s it will also have an integrated DAC (Digital Audio Converter).
If you turn the volume up to 100%, your device will be sending a distorted
signal. To avoid this, and to get the best quality from the speaker, we
recommend that you do not run your device any higher than 95% volume.
Some devices output higher than others, so you may need to reduce the
volume if you experience distortion.
Coaxial input
The coaxial input (J) can be used with TVs, DVD players and other devices
with a coaxial output. To activate the coaxial input (J), press the ‘COAXIAL’
button (4) on the remote or cycle through the inputs until coaxial mode
activates by pressing the input button (B) on the Chorus. The display (G)
will show ‘COAX’ when in optical mode.
Mute function
Press the ‘Mute’ button (3) on the remote to mute the volume. ‘MUTE’ will
appear on the display (G) when the volume is muted. Press the ‘Mute’ button
again to disable mute mode.
[...continued]
bluetooth setup