Remove the protective backing off the acrylic pieces.
2
Take two of the ‘T’ shape acrylic pieces and push them through the two
right hand slots in the base plate as shown below.
3
Place Motor 1 (green and white wires) between the two pieces with the
motor terminals pointing toward the rounded corners of the buggy and
the axle pointing outwards. Ensure that the motor is placed on the side
of the board marked TOP. Push an M3 x 30mm screw
through the holes in the ‘T’ pieces and motor
then secure it in place with an M3 nut.
4
Repeat steps 3 and 4 for Motor 2 (blue and black) on the opposite side
of the buggy, then push the wheels onto the motor axles.
5
