ENGLISH
USING THE STAND MIXER
|
7
USING THE STAND MIXER
5
Test beater to bowl clearance. Check
the proximity of the flat beater to
the bowl. The beater should just
clear the bottom of the bowl but
should not touch it. Plug Stand
Mixer into a grounded 3 prong
outlet. Turn Stand Mixer ON and
test each speed, making sure the
beater does not touch the bowl
during operation. If the beater is
too far away from the bottom, or is
hitting the bowl, proceed to step 6
to make the necessary adjustments.
6
Adjusting your beater to bowl
clearance. Unplug Stand Mixer.
Lower the bowl to the down
position. Adjust the beater height
adjustment screw to lower or raise
the bowl. Repeat steps 2-5
with the wire whip and spiral dough
hook. Your Stand Mixer is now set
up and ready for use.
Raise Bowl
Lower Bowl
IMPORTANT:
The Stand Mixer may
become warm during use. Under heavy
loads with extended mixing time periods,
you may not be able to comfortably
touch the top of the Stand Mixer. This is
normal. The Stand Mixer motor may emit
a pungent odor during initial operation.
This is common with electric motors.
W10862776A_EN_v09.indd 7
2/24/2016 3:36:08 PM
