6
Cleaning
Troubleshooting
Before cleaning your appliance, please ensure that it is cold and disconnected from the electricity grid.
It is best to avoid the use of steam cleaning equipment, steel wool pads, abrasive cloths and corrosive
detergents that could damage the appliance.
It is recommended that all of the accessories be washed in the dishwasher.
More detailed information is available in the Instructions for Use Manual and on
www.kitchenaid.eu
.
If you experience problems in operating your oven:
1. Check that the turntable support has been inserted properly;
2. Verify that the door has been closed properly;
3. Check the fuses;
4. Verify that there is an electrical current and that the oven is properly connected to the electricity grid;
5. Check that the oven has ample ventilation;
6. Wait 10 minutes and try starting the oven again; Before switching the oven back on, open
and close the door;
7. If you see an “F” immediately followed by an error code on the display, contact your nearest
Customer Service Center.
It will be necessary to provide the following information to the technician: the precise type and
model of the oven, the assistance code (visible on the right-hand inside edge when the oven door is
open) and the error code that appears on the display. This information will enable the technician to
immediately identify the type of intervention required.
If the oven needs to be repaired, we suggest you refer to an Authorised Technical Service Center.
Please refer to our website www.kitchenaid.eu for complete instructions for use.
In addition, you will find a lot more useful information about your products, such as inspiring
recipes created and tested by our brand ambassadors or the nearest KitchenAid cookery school.
