10
|
CARE AND CLEANING
Empty the solution from the Electric Kettle.
2
Fill the Electric Kettle with water, bring to
a boil, and drain out the water. Repeat this
step twice. The Electric Kettle is now ready
to use.
3
©2020 All rights reserved.
Specifications subject to change without notice.
REMOVING MINERAL DEPOSITS FROM THE INTERIOR
To get the best performance from your
Electric Kettle, decalcification will be
necessary. Calcium deposits may form on the
interior metal parts of the Electric Kettle. The
cleaning interval will depend on the hardness
of the water you put in the Electric Kettle.
Fill the Electric Kettle with white vinegar
to the .25 L mark. Add water to the .75 L
mark. Boil (100º C/ 212º F) and allow to
stand overnight.
1
NOTE:
If calcium deposits remain on the filter, let it stand overnight in a solution of
water and white vinegar. Rinse the filter thoroughly and replace in the Electric Kettle.
To access filter: Open the lid; the filter is
located behind the spout inside Electric
Kettle. Grasp the top of the filter to
remove.
1
Clean under hot water with a soft brush or
cloth to remove deposits. Replace filter by
sliding the filter into the slot behind the
spout.
2
W11387677A_V7.indd 10
W11387677A_V7.indd 10
1/28/2020 6:36:34 PM
1/28/2020 6:36:34 PM