ENGLISH
7
PRODUCT ASSEMBLY
Place the Bowl on the Clamping Plate
and twist to lock in place.
3
1
2
Slide and rotate the accessory, aligning
over the pin on the shaft.
4
Unlock the Motor Head and move it
down. Then, lock* the head to keep
it down. Before mixing, test lock by
attempting to raise the Motor Head.
5
(OPTIONAL) To adjust Beater to Bowl
Clearance:
Tilt back and lock* the
Motor Head. Turn the screw slightly
counterclockwise (left) to raise the
beater, or clockwise (right) to lower it.
NOTE:
If you overadjust the screw, the
locking lever may not lock into place.
*Locking option is available on select models.
W11555038A.indb 7
W11555038A.indb 7
21-01-2022 10:48:21
21-01-2022 10:48:21
