8
ENGLI
sH
Preparing the Blender for use
Before first use
Before using your Blender for the first time,
wipe Blender base with a warm sudsy cloth,
then wipe clean with a damp cloth. Dry
with a soft cloth. Wash pitcher, lid, locking
collar and blade assembly, sealing ring and
ingredient cup in warm, sudsy water (see
Care and Cleaning). Rinse parts and wipe dry.
Blender Assembly
1. Put locking collar with blade assembly
pointing up on a sturdy surface.
2. Put sealing ring, flat side down, around
the blades and into the groove within
the locking collar.
NotE:
For easier jar and collar assembly,
you can dip the gasket in water before
placing it into the collar. A damp gasket
makes it easier to attach the glass jar to
the collar.
3. Align the pitcher
tabs with the slots of
the locking collar.
4. Press down and rotate pitcher
clockwise, approximately ¼ turn until
two clicks are heard.
5. Adjust the length of the Blender
power cord.
Locking
collar
sealing
Ring