4
FAUCET USE
Operating the Faucet
All Models
Operate the faucet by moving the lever to the desired position.
Model KKFV01PP
■
The flow of water can be a stream or spray. The default water
setting is stream.
■
The spray assembly can be drawn out of the faucet
approximately 19" (48.26 cm).
Water spray setting
Push the diverter button on top of the spray assembly.
Water stream setting
Turn off the faucet and then turn it back on. The spray assembly
automatically resets.
Model KKFV01SP
■
The flow of water can be a stream or spray. The default water
setting is stream.
■
The spray assembly can be drawn out of the faucet spout
approximately 12" (30.48 cm).
Water spray setting
Push the large diverter button on top of the spray assembly.
Water stream setting
Push the small diverter button located below the larger button, or
turn off the faucet and then turn it back on.
FAUCET CARE
Faucet Exterior
Clean the faucet using a clean cloth and warm water, or a very
diluted solution of mild dish detergent in warm water. Dry and
polish the faucet with a soft cloth.
NOTE:
Do not use abrasive sponges, or anti-lime or acidic
cleansers such as scouring agents.
Aerator Assembly
Periodically, remove and clean the aerator under running water. If
the aerator is very dirty, soak it in household vinegar overnight.
Remove and Replace the Aerator
Model KKFV01PP
1.
Turn off water supply to faucet.
2.
Remove the aerator assembly (threaded collar, screen, and
rubber washer). The spray button spring will also come out
with the aerator assembly.
3.
Clean or soak only the aerator screen.
4.
Replace the spray button spring. Insert the small side into the
spray head around the slotted screw.
5.
Replace the aerator assembly, and fully tighten the threaded
collar with a wrench.
A. Full hot
B. Full on
C. Full cold
D. Off
A. Spray button
B. Spray assembly
A. Spray button
B. Stream button
A
B
C
D
A
B
A
B
A. Spray button spring
B. Rubber washer
C. Aerator screen
D. Threaded collar
A
B
C
D
