6
The gas supply system must comply with local regulations.
• You can find specific local regulations for some countries in the
paragraph “Relevant National Regulations.
• If no information concerning your Country is given, please ask your
installer for details.
Connection to the mains gas network must be carried out by a
qualified and competent technician, in compliance with local
regulations.
• The connection of the hob to the mains gas network or gas
cylinder must be made by means of a rigid copper or steel pipe
with fittings complying with local regulations, or by means of a
continuous-surface stainless steel hose complying with local
regulations. The maximum length of the steel hose is 2 linear
metres.
A
Gas supply
B
Gas hob manifold
IMPORTANT: if a stainless steel hose is used, it must be
installed so as not to touch any mobile part of the furniture. It
must pass through an area free from obstructions and permit
inspection along the entire length.
• After connection to the gas supply, check for leaks with soapy
water. Light up the burners and turn the knobs from max position
to minimum position
to check flame stability.
Gas connection
This operation must be performed by a qualified technician.
• The electrical connections must comply with local
regulations.
• The earthing of this appliance is compulsory by law.
• Do not use extension cables.
IMPORTANT:
information on voltage and power absorption are
given on the rating plate.
WARNING
WARNING
Electrical connection
L
Earth
(Yellow/Green)
N
Summary of Contents for KHDD 3020
Page 1: ...Instructions for use GB ...
Page 2: ......
