KitchenAid KFP1355, Instructions Manual, Page: 12 / 80

12
ASSEMBLING THE FOOD PROCESSOR ASSEMBLING THE FOOD PROCESSOR
Installing the adjustable slicing disc
1
Drop the drive adapter over the
power shaft.
3
Drop the assembled disc onto the drive
adapter and check to make sure it is
firmly in place.
2
Use the finger holes to hold the top of
the adjustable slicing disc. Align the pins
on the slicing adapter with the L-slots
on the bottom of the disc. Turn to lock
into place.
4
Install the work bowl cover, being sure
it locks into place.
TIP: You may need to adjust the drive
adapter with a slight turn on the power
shaft until it drops into place.
IMPORTANT: The adjustable slicing disc can only be installed in one direction.
5
Place the dicing kit lid on the work bowl
with the feed tube just to the left of the
work bowl handle. Grasp the feed tube
and turn the cover to the right until
it locks into place.
6
After dicing, remove the work bowl
cover and dicing blade, then insert the
dicing kit clean out tool into the dicing
kit base, and fold down to push any
extra food through the grid.
W10745720A_EN_v09.indd 12 10/8/14 6:10 PM