ENGLISH
9
PRODUCT ASSEMBLY
TIP:
You may need to adjust the Drive Adapter with a slight turn on the power shaft until
it drops into place. For easiest installation, make sure the Adjustment Knob is in the “0”
position.
INSTALLING THE EXTERNALLY ADJUSTABLE SLICING DISC
ADJUSTING THE SLICING THICKNESS
Hold the Slicing Disc by the finger grips
and lower it onto the Drive Adapter.
To attach the Work Bowl Cover, hook the
Lid Hinge into the Handle Hinge on the
Work Bowl and close the Cover.
Once the Work Bowl Cover is closed, the
Lid Latch will lock in position.
NOTE:
The Knob only works with
the Externally Adjustable Slicing Disc.
Changing thickness settings with other
discs or Blades installed will have no effect
on operation.
NOTE:
Your Food Processor will not
operate unless the Work Bowl Cover is
fully closed and the Work Bowl is properly
seated on the Base.
Set the desired thickness by moving the
Knob to the left for thinner slices and to
the right for thicker slices.
Thinner
Thicker
1
2
3
1
W11462548A.indb 9
W11462548A.indb 9
10/14/2020 12:23:17 PM
10/14/2020 12:23:17 PM
