9
OVEN USE
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
IMPORTANT:
The health of some birds is extremely sensitive to the
fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and well-
ventilated room.
Electronic Oven Controls
Control Display
The display will flash when powered up or after a power loss. Press
OFF to clear. When oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One tone
■
Valid pad press
■
Oven is preheated (long tone)
■
Function has been entered
■
Reminder (on some models), repeating each minute after the
end-of-cycle tones
Three tones
■
Invalid pad press
Four tones
■
End of cycle
Use the Options key to change the tone settings.
Options
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Options key.
Use the Options key to scroll through the features that can be
changed. Each press of the Options key will advance the display to
the next setting. After selecting the feature to be changed, the
control will prompt you for the required input. After the setting is
saved by pressing Start, the control will exit Options and display
the time of day. Details of all of the feature changes are explained in
the following sections.
Press OFF to exit Options.
Clock Time of Day
This clock can use a 12- or 24-hour cycle. To adjust, see
“12/24 Hour Clock” in this section.
Check that the oven and Timer are off.
To Change Time of Day:
1.
Press OPTIONS once. After 3 seconds, “SET CLOCK-PUSH
START TO CHANGE” will be displayed.
2.
Press START to display the current setting.
3.
Press “3” for AM or “6” for PM.
4.
Press the number keypads to set the time of day.
5.
Press START.
6.
Press OFF to exit.
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but can be changed to
Celsius.
To change:
1.
Press OPTIONS until “TEMP UNIT” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press OFF to exit.
Audible Tones Disable
Turns off all tones, including the end of cycle tone and key press
tones. Reminder tones are still active when all tones are disabled.
1.
Press OPTIONS until “ALL SOUNDS” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press OFF to exit.
Tone Pitch (Volume)
Sets the pitch of the tone to either high or low.
1.
Press OPTIONS until “TONE PITCH” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press OFF to exit.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1.
Press OPTIONS until “CYCLE TONE END” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press OFF to exit.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1.
Press OPTIONS until “KEY PRESS TONE” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press OFF to exit.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end of cycle tones.
1.
Press OPTIONS until “REMINDER TONE” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press OFF to exit.
12/24 Hour Clock
1.
Press OPTIONS until “12/24 HR” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press OFF to exit.
