6-3
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
WARNING
FAILURE
(Leftmost
2 Clock
Digits)
ERROR
(Rightmost
2 Clock
Digits)
MESSAGE/DESCRIPTION
SUGGESTED CORRECTIVE ACTION PROCEDURE
F0
Default
E0
No failure (GOOD)
F1
Component
E0
CHECK OVEN USER INTERFACE
PROCEDURE:
Before proceeding, press OFF, OFF, START to enter the
Diagnostic mode.
A. Unplug oven or disconnect power.
B. Replace oven user interface board.
C. Replace all parts and panels before operating.
D. Plug in oven or reconnect power.
E. Verify operation is normal. Go to step 1 and complete checks.
F1
Component
E1
CHECK OVEN APPLIANCE MANAGER
PROCEDURE:
Before proceeding, press OFF, OFF, START to enter the
Diagnostic mode.
A. Unplug oven or disconnect power.
B. Check oven door switch. If OK, go to step C.
C. Replace oven appliance manager.
D. Replace all parts and panels before operating.
E. Plug in oven or reconnect power.
F. Verify operation is normal. Press OFF, OFF, START to reenter the Diagnostic
Mode and complete checks.
F1
Component
E2
CHECK MICROWAVE USER INTERFACE
PROCEDURE:
Before proceeding, press OFF, OFF, START to enter the
Diagnostic mode.
A. Unplug oven or disconnect power.
B. Replace microwave user interface.
C. Replace all parts and panels before operating.
D. Plug in oven or reconnect power.
E. Verify operation is normal. Press OFF, OFF, START to reenter the Diagnostic
Mode and complete checks.
F1
Component
E3
CHECK MICROWAVE APPLIANCE MANAGER
PROCEDURE:
Before proceeding, press OFF, OFF, START to enter the
Diagnostic mode.
A. Unplug oven or disconnect power.
B. Replace microwave appliance manager.
C. Replace all parts and panels before operating.
D. Plug in oven or reconnect power.
E. Verify operation is normal. Press OFF, OFF, START to reenter the Diagnostic
Mode and complete checks.
FAILURE
(Leftmost
2 Clock
Digits)
ERROR
(Rightmost
2 Clock
Digits)
MESSAGE/DESCRIPTION
SUGGESTED CORRECTIVE ACTION PROCEDURE
F1
Component
E4
CHECK MICROWAVE POWER RELAY
PROCEDURE:
Before proceeding, press OFF, OFF, START to enter the
Diagnostic mode.
A. Unplug oven or disconnect power.
B. Replace microwave power relay.
C. Replace all parts and panels before operating.
D. Plug in oven or reconnect power.
E. Verify operation is normal. Press OFF, OFF, START to reenter the Diagnostic
Mode and complete checks.
F1
Component
E5
CHECK MICROWAVE INVERTER
PROCEDURE:
Before proceeding, press OFF, OFF, START to enter the
Diagnostic mode.
A. Unplug oven or disconnect power.
B. Replace microwave inverter.
C. Replace all parts and panels before operating.
D. Plug in oven or reconnect power.
E. Verify operation is normal. Press OFF, OFF, START to reenter the Diagnostic
Mode and complete checks.
F1
Component
E6
CHECK MICROWAVE WAVE GUIDE
PROCEDURE:
Before proceeding, press OFF, OFF, START to enter the
Diagnostic mode.
A . U nplug oven or disconnect power.
B. Replace microwave wave guide.
C. Replace all parts and panels before operating.
D. Plug in oven or reconnect power.
E. Verify operation is normal. Press OFF, OFF, START to reenter the Diagnostic
Mode and complete checks.
F2
Keypad
E0
E1
KEYPAD DISCONNECTED
STUCK OR SHORTED KEY
PROCEDURE:
Before proceeding, press OFF, OFF, START to enter the
Diagnostic mode.
A. Unplug oven or disconnect power.
B. Check keypad connector for firm connection.
C. Replace all parts and panels before operating.
D. Plug in oven or reconnect power.
E. If error code returns after 60 seconds proceed to step F.
F. Unplug oven or disconnect power.
G. Replace keypad.