14
How to use DynamicClean
DynamicClean uses special water jets to provide an intensive wash for shallow dishes and pans loaded
centrally to the DynamicClean area.
1. Adjust the DynamicClean area
G
folding down rear plate holders to load pots.
2. Load pots and casseroles inclined vertically in DynamicClean area. Pots have to be inclined towards the
power water jets.
G
Programming
The list of available programs and options can be found in program table on next page. To switch on the
appliance, press
.
Press
button to choose program in accordance with the level of soiling of the dishes and with
Program table
. Information will be shown on the display:
When a program, additional options or
Delay
is chosen, press
button and close the door within 3
seconds to start chosen program.
E1.
Active additional options
E2.
Selected program indication
E3.
Short program description and program duration,
program progress
To cancel or change the program in progress:
- Press button
for 3 seconds to cancel the program on running (water is drained for up to 1 minute,
then the appliance switches off).
- A short press of
button will wake up the unit.
- Select a new program pressing
button.
- Press the
button and close the door.
To pause the program (e.g. if you want to insert an
item):
- Press
button or open the door with caution (the
program pauses) and insert the items,
(beware of HOT
steam!).
- Press
button and close the door within 3 sec. to
restart the cycle (the program resumes the cycle from where
it was interrupted).
PAUSE
PRESS |
>||