KitchenAid KCGT 6010/I, Instruction Manual, Page: 8 / 16

5.1
5.2
CLACK!
5.3
5.4
Fig.4
• Connect an extraction pipe to the connection
ring on the hood and, whilst you inserting the
hood into the cabinetry, check that the
extraction pipe and the electrical wire come out
of the hole made in the top of the cupboard.
• Attach the hood to the bottom of the cupboard
with 8 screws. The frame on the box has more
than 8 slots for passing the screws through, use
the most suitable ones for your installation
making them as equidistant as possible.
Fig. 5
• Remove the grease filter and hook the filter
support frame onto the hood. At this stage
connect up the electrics on the control panel
and the lights.
• Hook the filter support frame onto the hood
(snap fitting onto the two side seals).
• Refit the grease filter.
Installation
8
5019_718_02011_UK 30-05-2007 10:06 Pagina 8