background image

3

When using electrical appliances, basic safety precautions should always
be followed, including the following:

1.

Read all instructions.

2.

To protect against the risk of electrical shock, do not put the
Blender in water or other liquids.

3.

Close supervision is necessary when any appliance is used by or
near children.

4.

Unplug the Blender from the outlet when not in use, before putting
on or taking off parts, and before cleaning.

5.

Avoid contact with moving parts.

6. 

Do not operate any appliance with a damaged cord or plug, or after
the appliance malfunctions or has been dropped or damaged in any
manner. Return appliance to the nearest authorized service facility for
examination, repair, or electrical or mechanical adjustment.

7. 

Do not use outdoors.

8. 

Do not let the cord hang over the edge of a table or counter.

9. 

Keep hands and utensils out of the container while blending to
reduce the risk of severe injury to persons or damage to the Blender.
A scraper may be used, but must be used only when the Blender is
not running. 

10.

Blades are sharp. Handle carefully.  

11.

Always operate the Blender with the cover in place.

12.

When blending hot liquids, remove the center piece of the 
two-piece cover.

13.

The use of attachments, including canning jars, not recommended
by KitchenAid may cause a risk of injury to persons.

14.

This product is designed for household and commercial use.

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS

Summary of Contents for KCB148

























Reviews: