5
Note:
Displayed set points correspond to the average temperature throughout the whole refrigerator.
Vacation Mode
This function can be activated to reduce the energy consumption of the appliance during a prolonged
period of time. After activating the function, remove the food from the appliance and keep the
door closed since the refrigerator will maintain a suitable temperature to prevent the formation of
unpleasant odors (+12°C).
To activate/deactivate
press the Vacation mode button for 3 seconds. When the function is enabled,
the related symbol will light up and the temperature of the refrigerator compartment will be set to a
higher setpoint (the temperature display will show the new temperature setpoint of +12°C). Changing
the temperature setpoint will automatically deactivate the function.
Fan
The Fan improves temperature distribution inside the product, allowing better preservation of stored
food. By default, the fan is switched on.
To switch off the FAN
press and hold Fast Cool
and Stop Alarm
buttons at the same time
for 3 seconds until an audible signal sounds and Fan icon
will turn off as confirmation that the fan
has been switched off. To switched on the FAN repeat the same procedure. As a confirmation audible
signal sounds and the icon turns on.
Note:
Reasons why switch off the fan look for “ENERGY-SAVING TIPS” in the Instructions for Use.
Refrigerator compartment temperature
A different temperature can be set using the “Temperature” button.
Fast Cool Function
Using Fast Cool function it is possible to increase the cooling capacity in the refrigerator
compartment. The use of this function is recommended when placing a very high quantity of food in
the refrigerator compartment. Press the Fast Cool button
to activate Fast Cool function. When
activated, the Fast Cool indicator turns on. The function is automatically disabled after 6 hours, or can
be manually disabled by pressing Fast Cool button
again.
Stop Alarm
Press in case of alarm to mute the acoustic alarm
.
Installation
• Be careful not to damage the floors (e.g. parquet) when moving the appliance.
• Make sure the appliance is not near a heat source.
• Install and level the appliance on a floor strong enough to take its weight and in a place suitable for
its size and use.
• The appliance is arranged for operation in places where the temperature comes within the following
ranges, according to the climatic class given on the rating plate. The appliance may not work properly
if it is left for a long time at a temperature outside the specified range.
Climatic Class
Amb. T. (°C)
SN
From 10 to 32
N
From 16 to 32
ST
From 16 to 38
T
From 16 to 43
Summary of Contents for iconic
Page 2: ...Index EN pag 3 ...
