9
Progress Bar
1. Progress bar
The progress bar is a visual picture of the estimated running time
of a cooking cycle. It will appear during sensor cooking functions.
The line appears below the word “Sensing,” and shows progress
by the darkening of the line from the left. After the sensor is
finished sensing, the remaining cook time replaces the word
“Sensing” at the top of the display, but the progress bar
continues to be displayed.
Start
The START button will start any function.
If non-sensor cooking is interrupted, touching START will resume
the preset cycle.
For added convenience, the “Start” touch pad is also available on
some display screens, and provides the same function as the
START control button.
Off/Cancel
The OFF/CANCEL button clears any incorrect command and
cancels most functions except for the Timer, Child Lock and
Learning Mode. It will not erase the time of day.
The oven will also turn off when the door is opened. Close the
door and press the START button or touch “Continue” on the
display screen to resume the cycle. A sensor cooking cycle may
not be resumed if interrupted by opening the door.
Clock
This is a 12-hour clock, showing a.m. and p.m. When power is
first supplied to the oven, or after a power failure, the “Home”
screen will appear.
To Set Clock: Press CLOCK, and follow directions.
To Hide Clock: Press CLOCK, then press OFF/CANCEL. “Home”
will appear in place of the time of day on display screen.
To Display Clock: Press CLOCK, then press START.
Tones
Tones are audible signals, indicating the following:
One tone
■
Valid entry (short beep)
■
End of Timer countdown (long tone)
Two tones
■
Reminder (short beeps), repeat each minute for 15 minutes
after the end-of-cycle tones
■
Between stages (short beeps)
Three Tones
■
Invalid entry (short beeps)
Four tones
■
End of cycle (long tones)
To Disable Tones: Turn volume off using the “Hints & Settings”
menu.
Timer
The Timer can be set in minutes and seconds, up to 90 minutes,
and counts down the set time.
NOTE: The Timer does not start or stop the oven.
1. Timer countdown
When the Timer is in use, the oven can still operate. During an
oven operation, “Timer” will appear in the upper, right-hand
corner of the display. The countdown may also be seen by
pressing TIMER SET/OFF. Touch “Return” to go back to the
previous screen or wait until the timer ends. If the timer ends
while oven is still operating, the tone will sound and the display
will return to the set operating mode.
To Set: Press TIMER SET/OFF, enter desired time and touch
“Start.” The time can be reset during the countdown by pressing
TIMER SET/OFF, entering a new time, then pressing START.
To Cancel: Press TIMER SET/OFF twice.
Reheating
Sensin
g
1
8:16
Reheat
Defrost
Cook
Melt
Grill
MORE
CHOICES
TIMER
04:44
1