10
13.
Slide the bezel opening over the valve stem and attach the
side burner valve assembly and bezel to the side burner shelf
with the screws removed in Step 9.
14.
Replace the searing side burner, angling it so that the valve
orifice goes into the side burner tube.
15.
Connect electrical plugs on underside of sear burner.
16.
Insert the valve stem into the knob and push knob into place
.
17. The igniter battery is not factory installed. A “AA” size alkaline
battery is located in the accessory box on the grill grate. Install
battery at this time following the instructions in “Replacing the
Igniter Battery” section.
Attach Left Side Shelf
1. Unpack left side shelf.
2. Open grill lid.
3.
Remove 3 screws from the side of the side shelf.
4.
Remove the 3 screws on the grill side panel and 1 screw on
the grill control panel.
A. Bezel
B. Valve stem
A. Electrical plug from grill
B. Electrical plug from sear burner
A
B
A
B
A. Side shelf screws
A. Grill side panel screws
B. Grill control panel screw
A
A
B
