background image

12

Seam

Pulse button

Speed control  

buttons

Speed selection 

indicator

lED display

Unlock  

button

oPEraTINg THE HaND BlENDEr

Using the blending arm

NoTE: Your Hand Blender is ideal to use for blending, crushing, or puréeing. It is best used for 

soups, cooked vegetables, sauces, baby food, smoothies, milk shakes, frosting, or crushed ice.

TIP: To avoid splashing, insert the Hand 

Blender into the mixture before pressing  

the pulse button, and release the pulse  

button before pulling the Hand Blender  

out of the mixture. 

1

Press the UNLOCK button. LED display 

will light up when unit is ready.

2

Use the arrow buttons to adjust the 

speed, using the LED display as a guide.

3

Insert Hand Blender into mixture. Then 

press the PULSE button to activate.

NoTE: 

Do not immerse hand blender 

in liquids deeper than the seam of the 

attachment. Do not immerse motor body 

into liquids or other mixtures.

4

After blending is complete, release the 

pulse button; then remove Hand Blender 

from mixture.

5

Remove the battery by placing your 

finger on the battery release lever and 

pulling the lever away from the motor 

body. The battery will release from  

the top of the unit.

TIPS For grEaT rESUlTS

IMPorTaNT: Always wait to insert 

battery into Hand Blender until accessories 

are attached. After using, always remove 

battery before disassembling Hand Blender.

W10532509A_01_EN_Final4.indd   12

12/11/12   1:34 PM

Summary of Contents for 5KHB3583














Reviews: