13
English
oPEraTINg THE HaND BlENDEr
oPEraTINg THE HaND BlENDEr
5
Snap pan guard into place with an even,
downward motion.
IMPorTaNT: The unlock button must be pressed before the Hand Blender will operate.
6
Slide the charged battery into the top
of the Hand Blender motor body. Make
sure it latches securely.
Pulse button
Speed control
buttons
Speed selection
indicator
Battery life
indicator
Unlock
button
lED display
Using the lED display panel
1
When operating the controls on the
Hand Blender, always make sure the
LED display is facing toward you. Grip
the handle with your thumb on the
back of the unit, and your fingers on the
controls in front, as shown.
2
The bottom bar on the LED display
panel is the battery life indicator. Hold
the Hand Blender so that you can see
the LED display light up when you
press the UNLOCK button with your
index finger.
3
The top bar on the LED display panel is
the speed selection indicator. To adjust
speeds, operate the arrow buttons
with your index finger, while viewing
the speed indicator on the LED display.
When the LED faces you, the right
button will increase the speed and the
left button will decrease the speed.
4
After selecting desired speed, press
the PULSE button to begin blending.
See “Using the blending arm” section
for more information.
NoTE: The Hand Blender will automatically
power down after 60 seconds of not
operating or being manually unlocked.
W10529667A_01_EN.indd 13
12/28/12 12:51 PM
