ENGLISH
15
CARE AND CLEANING
Phase 2:
Place the container (~0.5 L)
below the Steam Wand. Then, press
button. Start/Cancel (
) and Water
Mode lights will blink fast after the second
phase is complete. Empty the container.
3
1 2
Phase 3:
Place the container (~0.5 L) below
the Steam Wand.
Empty, rinse and refill the
Water Tank with fresh water to Max fill line.
Replace the Water Tank. Press
button.
Start/Cancel (
) will blink fast after
the third phase is complete. Empty the
container.
4
1 2
Phase 4:
Place the container (~0.5 L) on
the Drip Tray below Group Head. Then,
press
button. Clean light and
button light will blink fast after the fourth
and final phase is complete. Empty the
container.
Press
button to complete the Clean
cycle. Machine will go back into heating
mode.
5
WINTER STORAGE CARE
IMPORTANT:
To avoid damage, use and store your Espresso Machine where it will not
freeze. Because some water remains inside the unit, freezing can damage the product.
If storing or moving during freezing weather, purge your Espresso Machine.
To purge the Espresso Machine, ensure Steam Wand is attached and Water Tank is at least half
full.
1.
Place a cup under the Steam Wand nozzle.
2.
Turn the Espresso Machine On, toggle Mode Button to Steam. Press Start/Cancel (
).
Once steam exits the Steam Wand for approximately 10 seconds, remove Water Tank and
allow remaining water in the machine to exit through the Steam Wand.
3.
Purging cycle will be complete once Espresso Machine stops and the Water mode will
blink.
4.
Turn On/Off (icon) button to off. Empty and re-install Water Tank. Then, unplug the
Espresso Machine.
W11331487C_01_EN.indd 15
W11331487C_01_EN.indd 15
26-04-2021 13:42:12
26-04-2021 13:42:12
