8
| OPERATING THE COFFEE MAKER
INSTALLING THE WATER FILTER
IMPORTANT:
Every time you install a new
water filter, run the Coffee Maker through
a complete brew cycle without coffee�
Use a full carafe of clean, cool water�
OPERATING THE COFFEE MAKER
1
Place the charcoal filter in a
container filled with fresh, cool
water� The charcoal filter should
remain submerged in the water
for 10 minutes� Rinse the charcoal
filter under running water for
5 seconds after soaking�
Before first use
Wash the Gold Tone permanent filter, filter
basket, and carafe in hot, soapy water; then
rinse with clean water and dry� Do not use
abrasive cleansers or scouring pads�
NOTE:
These parts can also be washed
in the top rack of the dishwasher�
Installing the charcoal filter
Using the filter is optional but strongly
recommended� The Coffee Maker will
operate normally without the filter, but it
reduces contaminants that can impair
coffee flavour�
The filter is for use only with municipally
treated tap water or well water that is
regularly tested for contaminants; it is not
intended to remove contaminants in water
that is not suitable for drinking�
3
Lift the water tank lid using
the tab at the front of the lid�
2
Put the charcoal filter into the filter
assembly� Snap to close�
W11048745B.indb 8
11/12/2018 7:17:11 PM
