KitchenAid 5KCF0103, Instructions Manual

Page: 26 / 28

26
TROUBLESHOOTING
• Is the Cook Processor plugged into
a grounded outlet?
Plug the Cook Processor into a grounded
outlet.
• Is the fuse in the circuit to the Cook
Processor in working order?
If you have a circuit breaker box, make
sure the circuit is closed. Try unplugging
the Cook Processor, then plug it back in.
• Display shows
UNLOCKED
:
Bowl is not locked into the base correctly.
Check the bowl to be sure it is locked into
place.
• Display shows
LID OPEN
:
Lid is not latched on the bowl and an
Automatic Cooking Mode other than
Steam P1 or a manual attachment speed,
Pulse or Quick Stir is being selected.
Check the lid to be sure it is latched
into place.
• Display shows
MODE
:
The display will show
MODE
if Quick
Stir or Pulse is pressed during an
Automatic Cooking Mode. These
functions are disabled during
Automatic Cooking modes.
• Display shows
ACCESSORY
:
The display will show
ACCESSORY
if the
StirAssist blade is installed and Pulse or a
higher speed is selected.
• Display shows
COOLING
:
Unit is cooling down if a temperature
lower than the current cooking
temperature is selected.
Error messages:
• Motor turns off during processing
and display shows “Error 1”:
The motor is overloaded. Reduce the
amount of ingredients and turn off the
unit to allow the motor to cool down for
several minutes.
• Motor and/or heater will not turn on
and display shows “Error 2”:
Turn off and unplug the Cook Processor.
Call for service.
• Cook Processor turns off before the
end of the cycle and display shows
“Error 3”:
Unit is malfunctioning. Turn off and
unplug the Cook Processor. Call for
service.
• If the problem cannot be corrected:
See the “Warranty and Service” section.
Do not return the Cook Processor to the
retailer – retailers do not provide service.
If your Cook Processor malfunctions or fails to operate