5
5. Never wrap the cord tightly around the appliance, as this could place undue stress
on the cord where it enters the appliance and cause it to fray and break.
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE, OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
IMPORTANT
During the first few minutes of initial use, you may notice smoke and/or a slight odor.
This is normal and should quickly disappear. It will not recur after appliance has been
used a few more times.
•
The blades are
VERY
sharp.
•
ALWAYS
unplug the appliance before assembling, disassembling, cleaning or
storing.
•
The appliance must be kept out of reach of children.
•
Do not hold the motor housing under running water, nor immerse it in water.
•
The appliance is constructed to process normal household quantities.
BEFORE USING
1. Carefully unpack the blender and all parts. Remove all packaging materials,
including any stickers or labels.
2. Wash the jar, lid, measuring cup and blade in warm soapy water.
DO NOT IMMERSE
THE BASE (MOTOR HOUSING) IN WATER.
3. Care should be taken when cleaning the blades, as the blades are sharp.
4. Position the blender base on a dry, level, heat-resistant surface and assemble
according to instructions.
5. It is recommended to operate this appliance on a separate outlet and circuit from
other appliances to avoid overloading the circuit.
SPECIAL INSTRUCTIONS:
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
ASSEMBLY INSTRUCTIONS:
1.
Place blender base on a flat, level surface.
DO NOT PLUG IN UNTIL THE
BLENDER IS COMPLETELY ASSEMBLED.
2. Place the gasket on the cutting blade assembly and place assembly inside the jar
collar. Screw the jar collar securely on the container and set assembled container
in base. Place the integrated measuring cup in the jar lid and twist to secure. Place
lid on top of jar.
