3. Switch both the power and heat switches to the ON position. The switches will light up when on.
4. Pre-heat for 15 minutes before use.
5. Add the
fl
oss sugar (sold separately) directly into the well in the heating head using the provided
fl
oss scoop. Do not over
fi
ll.
6. Cotton candy will begin to spin around the bowl as the heater head continues to operate. As the
cotton candy accumulates, it will build up and shoot out through the top of the spinner head.
NOTE:
To prevent overheating of this unit, please allow it to cool down for at least 15 minutes after
an hour of continuos use.
CLEANING & MAINTENANCE
NOTE:
To maintain cleanliness and increase service life, this item should be cleaned daily. Do not
immerse the unit in water or any other liquid. If liquid enters the electrical compartment it may cause
a short circuit or electrical shock
1. Turn off all switches on the unit and unplug the unit to let cool down.
2. Allow the heating head to cool fully before cleaning.
3. Clean the base and stainless steel bowl with a wet towel only.
NOTE:
Keeping the heating head clean is important for proper food safety and will help ensure a
longer life for your unit.
NOTE:
Using a Bubble Shield on top of your cotton candy unit while in use will help reduce airborne
debris and loss of product. Bubble Shield (COT-21/C) is sold separately.
TROUBLESHOOTING:
Problem
Cause
Solution
Machine is not turning on
Not plugged in
Check the power cord and plug in
Broken micro switch
Check the bowl and micro switch.
If connected and still not working
replace micro switch
Heating head is not working
Broken motor
Replace the motor
Belt disconnected
Replace the belt
Machine isn’t heating
Heating element broken
Replace the heating element
Thermostat
Replace the thermostat
