AFTER SALES SUPPORT
1-888 367 7373
[email protected] FDM-1301 / 44913-14
TO ASSEMBLE
Although the Chute Assembly comes completely assembled in the box, you will need to take it apart to wash it before
you use it the first time and after each use.
1.
To disassemble the chute assembly before the first use, turn the dispenser clockwise slowly about ¼ turn. The
dispenser will come off. VERY CAREFULLY remove the grinder. You may now wash the dispenser, grinder, chute
and plunger.
2.
To re-assemble the chute assembly, insert the grinder into the chute, place the dispenser onto the chute with the
left indentation pointing up, turn it ¼ turn counter clockwise to secure it in place.
3.
Once the chute assembly is complete, insert the chute assembly into the base as shown below, lining up the
flanges on the chute assembly with the notches in the base, and turn it ¼ turn counter clockwise to secure it in
place.
7
