Introduction
This guide is intended as a supplement to the assembly instructions supplied with individual cabinets.
Due to the large variety of door and appliance configurations, a small number of modifications may
be needed during installation as shown below.
This avoids the need for multiple drillings to the cabinet, which looks unsightly – and may only be
needed on rare occasions.
NOTE
Ensure all tower cabinets are securely fixed to the wall using appropriate fixings to suit the wall
type. See Appendix for more information on fixing cabinets to the wall.
Before you get stuck in; take five minutes to review this installation guide.
Please note the following points:
•
Appliance Housing Back Panels will need to be cut to length to suit the chosen unit
type – these sizes are shown on individual unit pages.
•
In a limited number of configurations, such as drawer and fridge/freezer options,
additional drilling is required to the cabinet ends – these positions are shown on
individual unit pages.
•
Take care to position fixed and adjustable shelves as shown on individual pages.
•
Ensure the cabinet is fixed to the wall.
Adjustable
Fixed
Shelves
Note that cabinets are supplied with 3x Fixed and 1x adjustable shelf. All appliances must have a fixed
shelf above & below them – adjustable shelves are only intended for storage purposes.
Back Panels
Back panel heights on appliance housing units
vary depending on door configurations – cutting
dimensions are shown on individual unit pages.
i
