Kitchen Brains © 2012 | www.KitchenBrains.com | 229-51303 E
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Page 5 of 8
(FASTIMER.)
®
MT-300 Mixer/Appliance Timer
OPERATING THE MT-300
1. Load ingredients into mixer bowl. Use the correct ingredient quantities for
your product.
DO NOT OVERLOAD MIXER BOWL WITH PRODUCT!
2. Turn the MT-300 power switch to ON.
3. Immediately press the appropriate timing button on MT-300. That button’s LED will
be lit.
NOTE: This must be done within 5 seconds to avoid a time-out alarm. If the time-out
alarm sounds, turn the MT-300 power switch OFF and repeat Steps 2 and 3.
4. When mixing is done the display will flash 00:00 and beep every half second. Turn the
MT-300 power switch OFF.
5. Empty ingredients from the mixing bowl.
WARNING: TURN MT-300 OFF BEFORE
TOUCHING APPLIANCE!
OPERATING NOTES:
a. A mixing cycle can be programmed up to 99 minutes and 59 seconds.
b. TO CANCEL A TIMING CYCLE DURING COUNTDOWN: Turn the MT-300 OFF.
DISPLAY DESCRIPTIONS
a. The mixer timer is in Operating Mode and is ready to start a timing cycle.
b. The mixer timer is in Operating Mode and a timing cycle has been completed.
The mixer timer is in Programming Mode.
The mixer timer is currently set at Sound Level 1.
The mixer timer is in Diagnostic Mode.
