MA0886RHG
14
Important Safety Precautions
DANGER
Failure to follow the safety precautions below will result in
serious injury or death.
Provide sufficient strength for the draw bar (Refer to pages 32-33).
Provide sufficient screw depth for the draw bar.
Firmly tighten the draw bar.
Apply adhesive to the thread part of the draw bar and screw it in at the
specified torque.
・
If the draw bar break, the gripping
force is instantly lost and this is
dangerous as work will fly out.
・
If the screw depth of the draw bar
is insufficient, the screw will break
and the gripping force will be lost
instantly, and this is dangerous as
work will fly out.
・
If the draw bar is unbalanced,
excessive vibration could occur
breaking the screw and resulting in
the gripping force being lost and
the work flying out.
・
When screwing the draw bar,
piston to the end of the pull side
stroke.
・
If the engagement of the screw of
the draw bar is loose, vibration
may occur resulting in breakage of
the screw. If the screw breaks, the
gripping force will be lost instantly,
which is dangerous as the work
will fly out.
・
When the screw is loosened, the
jaw stroke of the chuck becomes
shorter and this is very dangerous
as the work will fly out.
Type
Tightening torque
Y0715R / RE01C
100 N・m
Y1020R / RE47
100 N・m
Y1225R / RE47
180 N・m
Y1530R / RE47
355 N・m
Y2035R / RE47
620 N・m
！
For Machine Tool Manufactures