Charging Battery
Charge battery by plugging JST
connector from Lipo battery to JST/USB
cable. We recommend charging the
battery prior to your first flight. You can
charge the battery while it’s attached to
the drone as well.
Lego Drone Kit Instructions
The end of the battery has a male JST
type connector that fits with the female
JST type connector on the receiver
board. They fit together as shown.
When you plug the battery into the
receiver board, 2 LEDs located on the
board will light up.
**Do not overcharge the battery. Charge for a
couple hours at most and then remove. If you
notice the battery “puffing” up or “swelling” do
not use it and contact us for a replacement. **
