www.kita.com.tw
Display Digital Pressure Sensor
G.
INITIAL SETTING MODE
H.
ADVANCE SETTING MODE
【
NOTE :
】
*1. When setting is “ ”, the power-save mode is active.
Please refer to the item “ ” in detailed.
*2. When setting “ ”or “ ”, the display copy function mode is active.
Please refer to the item “ ” in detailed.
I
P
KP50
Series
Press button for more than 3 seconds.
(*1)
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
Measure mode
OUT 1
Operating mode setting
OUT 1
type setting
OUT 2
Operating mode setting
OUT 2
type setting
Response time setting
Display color setting
Unit setting
Measure mode
(oPS)
One point set
mode
Window comparator
mode
Hysteresis
mode
NC
mode
NO mode
oFF mode
(oPS)
One point set
mode
Window
comparator
mod
Hysteresis
mode
Use the or button to set OUT1 operating mode.
Use the or button to set OUT1 type.
Use the or button to set OUT2 operating mode.
Use the or button to set OUT2 type.
Use the or button to select response time.
ON:Green
OFF:Red
ON:Red
OFF:Green
ON/OFF:
Green
ON/OFF:
Red
Use the or button to set display color.
Use the or button to set desired pressure unit.
Alternately
displayed
Alternately
displayed
Alternately
displayed
Alternately
displayed
Alternately
displayed
Alternately
displayed
Alternately
displayed
NC mode
NO mode
2.5ms
25ms
100ms
250ms
500ms
1000ms
1500ms
(*2)
(*3)
(inHg)
(kPa/MPa)
(kgf/cm²)
(bar)
(psi)
【
NOTE :
】
*1. This setting mode will not display when output 2 is set to oFF.
*2. Pressure unit is MPa with positive and high pressure.
Pressure unit is kPa with vacuum and compound pressure.
*3. Only applicable for Vacuum/Compound.
(*1 )
(*2 )
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
Measure mode
Fixed hysteresis
value selection
Display color selection
Power-Save
Mode
Copy Function
Setting
Restore factory
setting
Measure mode
Press button for more than 5 seconds.
Use the or button to adjust fixed hysteresis value.
Use the or button to select LCD display color
relation OUT1 or OUT2.
Use the or button to turn Power-Save mode on or off.
Use the or button to set copy function.
Use the or button to select to restore to default
factory settings.
Alternately
displayed
*Applicable for one point set mode and window comparator mode.
*Hysteresis mode does not have this setting selection.
* : When finishing copy, the slave sensor would be
locked automatically.
*Only for KP50 -02- and KP50 -04- have this setting selection.
Alternately
displayed
Alternately
displayed
Alternately
displayed
Alternately
displayed
