background image

4.  Click Submit

NOTE: Email alarms require SMTP server set up

TO UPDATE OR ADjUST A VESSEL PARAMETER

Choose MANAGEMENT TAB/MANAGE DEVICES 

1.  Choose Manage Devices

2.  Click on the vessel that needs adjusted

3.  Click on parameter to change

4.  Update settings as required

5.  Click Update

TO UPDATE OR ADD USER IDS TO HAVE ACCESS TO THE ORB OR THE PERMISSIONS FOR EACH

Choose MANAGEMENT TAB/MANAGE PERSONNEL

1.  Manage Users to create, edit or delete accounts

 

a.  Fill in all fields to create an account

 

b.  Select which vessels each user should have access to in the ORB

2.  Manage Roles to create, edit or delete permission roles

 

a.  Select appropriate access for each role for the ORB

 

b.  Create a new role

TO MANAGE OR CREATE REPORTS

Choose MANAGEMENT TAB/MANAGE REPORTS 

1.  To see a report

 

a.  Click on the report name

 

b.  Add email address(es) where the report should be sent

 

c.  Click submit

2.  To create a new report

 

a.  Click Add New Report

 

b.  Create Title 

 

c.  Add Devices

 

d.  Set the desired schedule

 

e.  Add email address(es) where the report should be sent

 

f.  Click submit

15

15

97-1167-01 Rev. J

www.kistlermorse.com

Summary of Contents for ORB

























Reviews: