KisanKraft
®
Centrifugal Water Pump For
Agriculture
KK-WPP-10 /15 /21 /31 /2535 /50080
: +91.80. 22178200
Page 9 of 44
STORAGE
Cool the engine and keep the fuel valve in the “OFF” position before moving or storing
indoors to avoid the burning or fire.
1.
Keep the storage place dry and less dust.
2.
Clean the inner parts of the engine.
3.
Replace the oil after completely discharging the fuel tank and the carburetor.
4.
Disconnect the spark plug to infuse 2-3 grams of oil into the cylinder and rotate
the engine 3-4 times and then equip the spark plug.
5.
Cover the pump cover to avoid dust.
TROUBLESHOOTING
Problem
Probable cause
Action to be taken
The Engine can’t be
started
Refer the Engine manual
Refer the Engine manual
The pump cannot pump
water
The water infused is not
enough
Fill the pump with enough
water.
The filter is air
– logged.
Clear the air from the filter.
The tie-in is not firmly
equipped ,
Suction pile is leaking.
Ensure proper suction
Packing is proper and leak
free.
The pipe is damaged.
Replace the pipe.
Whether the head lift is too
high
Never exceed the rated
max. Lift, if so lower the
head lift.
Insufficient flux
Any block with impeller or
strainer
Remove the blockage in
the strainer
Gas leakage in inlet pipe
Fix any leakage in the pipe
Damage in impeller
Replace the impeller
