KisanKraft
®
Centrifugal Water Pump for
Agriculture
KK-WPE-2510-4015-5020
: +91.80. 22178200
Page 11 of 16
Troubleshooting
Problem
Probable Cause
Solution
Motor won’t start
No power
Check connections and voltage values
Impeller got stuck
Refer to maintenance
Motor does not
pump water
Clogged filter
Clean filter
Excessive intake
height
Move pump closer to water outlet level
Air in intake pipe
Check intake pipe is airtight.
Make sure foot valve is immersed by at
least 50 cm
Pump needs to be primed again
Flow rate
insufficient
Intake height at limit
Check intake height
Filter partially clogged
Clean foot valve and , if necessary ,
whole intake pipe
Impeller blocked
Disassemble pump and carefully clean
pump body and impeller
Tripped motor
overload cutout
Overheated motor
Check voltage and ventilation
Impeller stuck
Release impeller (see section on
maintenance)
