KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-520
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: +91.80. 6835 7800
Page 12 of 24
Ill. Assembly of throttle wire
A head of throttle wire connected to the carburetor; the other head connected to the throttle
lever assy. First, adjust the throttle lever at the bottom, and then insert the big head of the
throttle wire to the hole of the throttle lever assy. Put the throttle wire into the groove.
Attention: turn the throttle lever handle for checking the startup If dissatisfied the use, you can
adjust the carburetor
and the bolt.
IV. Assembly of the stop switch
The long stop switches and throttle wire to the right handle to avoid loss.
V. Adjustment of the depth
There are three grooves in the connect plate, the wheels put in the highest groove when
working. When not working, the wheels need putting in the middle or the bottom grooves
(depend on operator's height). Adjust depth skid, there are several holes in the depth skid, you
can adjust it according to self-request
