KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-410P
This warranty is null & void, if you fail to register the warranty with KisanKraft
by sending the KisanKraft Copy with dealer’s stamp
. KisanKraft Limited
: +91.80. 6835 7800
Page 15 of 52
OPERATION
Attention:
Inter-Cultivator must go through running-in before operating.
A.
Slow gear
1)
Hold the clutch bar with left hand to open the clutch.
2)
Pull back the shift lever with right hand, meanwhile, pay attention if it is in the slow
position, then hold the right bar with right hand (attention: do not hold the backshift
bar).
3)
Slowly unlock the clutch bar to close the clutch. In this situation, Inter-Cultivator can
run at slow gear.
4)
Speed up properly with right hand, then Inter-Cultivator can run at a low speed of
5km/h
B.
Fast gear
1)
Hold the clutch bar with left hand to open the clutch.
2)
Push the shift lever to the front with right hand, meanwhile, pay attention if it is in the
fast position, then hold the bar with right hand (attention: do not hold the backshift
bar)
3)
Slowly unlock the clutch bar to close the clutch. In this situation, Inter-Cultivator can
run at fast gear.
4)
Speed up properly with right hand, then Inter-Cultivator can run at a speed of 10km/h.
C.
Back gear
1)
Hold the clutch bar with left hand to open the clutch.
2)
Adjust the shift lever to the neutral position with right hand.
3)
Slowly unlock the clutch bar to close the clutch, then Inter-Cultivator will step back. (
Attention
: Do not unlock the backshift bar)
4)
If it is unnecessary to step back, you should holdfast clutch bar slowly with left hand,
then unlock the shift bar with right hand.
D.
When shifting in the process of running, you should decelerate (the standard should be
the continuous work of diesel engine), then close the clutch. You should change the shift
until the machine stop working
E.
When changing the direction, you should rotate the bar to left or right. (
Attention
: Do not
s hold the bar in wrong way, so as to avoid damaging the wheels when directing).
F.
Stop working
1)
Hold the clutch bar with left hand to open the clutch.
2)
After adjusting the shift lever to the neutral position, you should unlock the clutch bar
to make the machine stop working.
3)
When it necessary to stop working, the procedure should be done according to the
engine instruction. (
Attention
: This work is usually done on the smooth ground.)
