KisanKraft
®
INTERCULTIVATOR
KK-IC-320P
: +91.80.
6835 7800
Page 14 of 32
Afterwards, you should refuel adequate clean gasoline oil, pull the starting grip
5~10 times, then drain it. Refuel the lube oil for 4 hours running-in, then can use
the Inter-cultivator normally.
2. Technical maintenance table of mini-Inter-cultivator
2.1 Every-time maintenance (before and after work)
a)
Listen and check if there is malfunction of every part (such as abnormal noise,
overheat, loose screw and so on).
b)
Check if there is oil leakage from gasoline engine, gear box and running gear.
c)
Check if the oil level of gasoline engine and gear box is between the upper and
lower limit of dipstick.
d)
Clean the whole machine and spare parts which are with mud, grass, and oil
stain regularly.
e)
Do daily record.
2.2 Primary maintenance (per 150 hours)
a)
Carry out maintenance work based on all contents of every-time maintenance.
b)
Wash gear box, running gearbox and change lube oil.
c)
Check and adjust clutch, shift system and reverse gear system.
2.3 Secondary maintenance (per 800 hours)
a)
Carry out maintenance work based on all contents of primary maintenance.
b)
Check all gears and bearings. If they are fretted severely, please replace them.
c)
Check other parts of mini-Inter-cultivator , such as: rotary blades or bolts and so
on. If there is damage, please replace them.
2.4 Technical inspection (per 1500-2000 hours)
a)
Take the whole machine to the specific maintenance station and have a check.
If the spare parts are severely fretted, they must be changed or repaired
according to the situation.
3. Technical maintenance of mini-Inter-cultivator
Working
intervals
Maintenance
contents
Everyday
Work
with half
load for
8 hours
Work
for 1
month
or 20
hours
Work for
3 months
or 150
hours
Every
year or
1000
hours
Per 2
years
or 2000
hours
Check & tighten
nuts, bolts
√
Check and refuel
lube
√
Check and
change lube
√
（
1
st
time
）
√
（
2
nd
time
）
√
（
3
rd
time or
more
）
Check if there is
oil leakage
√
Clean mud,
grass and oil
stain
√
