KisanKraft
®
Warranty Certificate
(
CUSTOMER
C
OPY
)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited
(
Formerly known as KisanKraft Machine Tools P Ltd.)
: www.kisankraft.com
Missedcall:7676065555
Page 6 of 12
Important:
(1) Normal maintenance and adjustments to the product is the
responsibility of the customer. (2) Normal wear and tear is not covered under
warranty.
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell,
spark-plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under
the warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss:
KisanKraft Limited or its manufacturers will not
be liable for general damages, including bodily injuries, or for incidental or
consequential damages including, but not limited to, loss of use, loss of profits,
loss of production, expense of substitute equipment or other commercial loss or
damage.
Limitation of Liability:
This limited warranty is in lieu of all other express
warranties, obligations, or liabilities. Any implied warranties, obligations or
liabilities, including, but not limited to, any implied warranty of merchantability shall
be limited in duration to the applicable warranty period. Any action for breach of
any warranty hereunder, including, but not limited to, any implied warranty of
merchantability must be brought within the applicable warranty period.
Modifications of Warranty:
No agent, representative, dealer, or employee of
KisanKraft Limited or any of its manufacturers has the authority to increase or alter
the obligations of this warranty.
Assignment / Transfer of warranty:
The warranty cannot be assigned and shall
not transfer if the product is resold by the first buyer. The above warranties are
extended to the first end user (original purchaser), and no warranty is made, nor
authorized to be made assignable on resale by the first end user.
What you must do to obtain limited warranty service:
To obtain performance
of any obligation under this warranty for failure during the applicable warranty
period, deliver the defective product, to the nearest Authorized Dealer. KisanKraft
Limited, its manufacturers and its dealers reserve the right to inspect the claimed
defective part(s) to determine if the malfunction is the result of a defect covered by
this warranty. Please note that the decision of KisanKraft Limited with respect to
any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction:
All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
Chainsaws
Brush Cutters and Accessories
Harvester
s
Engines and Water Pumps
Hand Tools
Garden Tools
Cultivators and Accessories
Sprayers and Accessories
Transplanter and Post Hole Digger
Milking Machines
KisanKraft
®
CHAFF CUTTER
KK-FMC-500
: www.kisankraft.com
Missedcall:7676065555
Page 7 of 12
Before Getting Started
Please read this instruction manual carefully before use.
This instruction manual is used to explain the technical performance, use method, connection
and installation, common faults in operation of the machine. It guides users to proper operation,
use, repair and maintenance. Proper use of the machine can extend its service life and reduce
the failure rate.
Safety Precautions
1.
The product manual must be read carefully before using the machine. And adjust and
maintain according to the regulations.
2.
Before starting, check the following
a)
Whether the key parts are solid?
b)
Is the cutter wheel steering consistent with the specified direction?
c)
Is the upper casing locked?
d)
Is the Safety shield closed?
3.
Do not open the safety shield when the machine is running.
4.
If abnormal conditions are found, it is necessary to stop the inspection immediately. It is
strictly forbidden to rectify the fault when the machine is running.
5.
When the feed port is clogged, it is strictly forbidden to help feed with your hands or sticks.
6.
It is forbidden to mix iron objects, stones and other debris into the materials.
7.
Workplace should be well-ventilated and fire-proofed.
8.
Reasonable matching power should be ensured, do not increase spindle speed arbitrarily.
9.
The following people are not allowed to operate the machine:
Minors Drunken people and People with diseases that affect judgment,
10.
Before normal operation, please run for 3 to 5 minutes, and there be no abnormality before
you can feed the material. When feeding, it should be evenly distributed and should not
be overloaded.
11.
Note
: “When feeding port is blocked, it is forbidden to feed with hand or stick." It is strictly
forbidden to mix iron and stone and other debris into the material" and "the safety shield
must be installed in place. When the machine is running, it is strictly forbidden to open the
safety cover.
12.
Users who have not purchased safety protective devices shall, before putting the products
into use, configure their own safety protective devices in accordance with the standards.
Product Characteristics & Main Components
Our Chaff Cutter has characteristics like full steel plate structure, cast iron grass sticks and tool
holders, durable, can chop all kinds of forages like hay, corn Stover, etc. It is an economical
weeding equipment that is widely used at present. It has the advantages of small size, light
weight, simple installation, operation, maintenance, high production efficiency, etc. It is the best
choice among similar products.
Body, frame, grass roller, tool holder assembly, fixed blade, moving blade, feeding device, etc.
Working Principle
During work, The processed straw is straight into the cutting blade rotation mechanism under
the direct action of the grass roller for chopping, Using the centrifugal force generated by the
cutting roller in the rotary motion, the grass is pushed out 1-5 meters outside the casing.
Technical Specifications
Power
2.2kW(3 hp)
Max .Output (green)
500 Kg/H
Motor speed
2500 rpm
Max .Output (dry)
700 Kg/H
