KisanKraft
®
CHAFF CUTTER
FEC-2500,FMC-400/500/1200
FGM-200/300/450/1000/1300/1500
: +91.80.
22178200
Page 10 of 16
MAINTENANCE
In order to ensure your machine work properly, and has long service life, maintenance is a
must. Follow the instructions given below:
1.
Apply oil (lubrication) to all the rotating places like toothed gear and shaft sleeve
constantly to ensure smooth movement. Add lithium-based grease to the
antifriction bearing once in a year in order to avoid damage.
2.
When the knife is blunt (if used continuously for 8 hours), you should cut
sharpening in time. When cut sharpening, the moving knife should cut the slope,
the still knife should cut the upper place.
3.
After use, clean the residual grass and dust on the machine, cover it from dust
and keep it in a safe place.
4.
Regularly check fastening bolts, nuts, especially after operation for the first time.
If there are any loose screws tighten them immediately
.
5.
Check for any worn or damaged parts, repair if possible or replace if necessary.
6.
Clean the machine of the remains and store in a place without moisture.
7.
Do not use acidic or alkaline agents to clean the spare parts. Use degreasing
agents instead.
