Pronomic XL-12M1
2020-01-28
Pronomic XL-12M1 / ArtNr.: 00055469
7
Intended use
Important safety instructions
Connect the power cord to the power supply.
Only use the mains voltage specified for the device (see technical data).
Connect the signal sources with the appropriate audio cable (jack, XLR) to
the input and output jacks on the back of the unit.
Switch on the device when you have made all connections.
Connect only one cable with optional XLR, 6.35 mm jack or chinch.
Check all connections before switching on the device.
Before switching the device on, you must set the master volume control to
"0". Turn on the audio source and the device. Slowly increase the overall
volume at the desired level.
Installation and Operation
Disconnect the device from the power supply before
installation.
Place the speaker on a solid flat surface (ground, etc.). Make sure, that the speaker
doesn’t fall over.
CLEANING & MAINTENANCE
Never immerse the device in liquids.
Check the power plug at regular intervals and remove any dust or dirt that may have
accumulated.
