10
INSTALLATION
CARE
Removing the Headrail (If Necessary)
■
To remove the headrail, locate the rear tab on the mounting clip.
■
Push up on the rear tab to release the headrail.
Removing the Vanes (If Necessary)
■
Push up on the vane.
■
Gently open the vane hook by inserting a ‘credit card’ sized piece of rigid plastic between the vane and the long prong of the
vane hook.
■
Carefully remove the vane.
Cleaning Procedures
Dusting
■
Regular light dusting with a feather duster is all the cleaning that is needed in most circumstances.
Vacuuming
■
Use a hand-held vacuum with low suction for more thorough dust removal.
Spot-Cleaning
■
Prepare a solution of warm water and a mild detergent.
■
Dampen a clean cloth in the solution and wring it out.
■
Dab the spot with the dampened cloth until it is gone.
CAUTION:
Vertical fabrics should not be spot-cleaned or immersed in water.
Compressed Air
■
You can use compressed air or a hair dryer (cool setting) to blow the dust off your valance.
Tilt to
Remove
Rear Tab
Vertical Track Headrail
Push Up
