Gas Conversion
Step 5: Adjustment of Control Valves for Main Burner, Side burner.
a Remove all control-knobs with 5/32” Allen wrench (provided)
b. Adjust gas valve through access hole at knob-bezel by inserting a flat
head screw-driver. Turn the screw driver clockwise (to tighten) until it stops.
(Not: it may already be fully turned so it will not turn further). Then turn it
counterclockwise (to loosen) for one full revolution (360 deg, per revolution)
c. Adjust gas valves on the side burner.
d. Replace & secure knobs
Step 6: Remove Regulator
a. Use adjustable wrench to remove existing LP Gas regulator and Hose
assembly.
b. If you are replacing an existing Natural Gas Grill, the supply hose that
supplied Natural Gas to the old Grill will work with your new KS Grill.
c. Replace the LP Gas regulator and hose assembly with a Natural Gas supply
hose and regulator (not supplied with the Grill). Follow installation
instructions as supplied by the manufacturer. The regulator might not be
necessary. You should contact the local Natural Gas company to determine
if the gas pressure to the property is Regulated (has a regulator in the
system). If so then another regulator is not necessary.
d. A new hose is not supplied with this Grill so as not to overcharge the
consumer for unnecessary parts.
Natural Gas supply hoses are available at Costco.com and most hardware
stores and parts supply houses. If you have trouble locating the
parts, please call the Nexgrill Customer Service department 866
–
984
–
7455 to order parts or find help in locating them.
Step 7: Check for Gas leak
Make sure you perform the task before operate the grill. Please refer
to Page 13 on the manual on how to test for gas leak.
25
Summary of Contents for 720-0193
Page 21: ...GRILL LIGHTING INSTRUCTIONS 18...
